ServicesBumper Repair
Bumper Repair in Lemoore Station
A scuffed corner, a cracked cover or a bumper hanging loose after a parking lot tap. We repair the plastic where it can be saved and replace it when it can't. Then we match the paint to the panels beside it. One person handles your questions from the estimate to pickup.

Repair the cover, check what sits behind it
Most bumpers today are a painted plastic cover over a foam absorber and a metal or composite reinforcement bar. A slow tap can leave barely a mark on the paint while a clip underneath has broken or the foam has compressed. We look at all of it before we write the estimate, so the number reflects the whole repair and not just the part you can see.
Scrapes, gouges and many cracks can be repaired. Plastic welding rebuilds cracks and broken tabs from the back side. A flexible filler and primer system keeps the finish from cracking when the cover flexes. When a cover is torn through in several places or badly distorted, replacement is usually the better value, and we will tell you so plainly.
You deal with one person throughout. The same contact who looks at your car explains the options, orders parts, keeps an eye on the paint work and calls you when your car is ready.
What our bumper repair covers
Inspection behind the cover
When the damage calls for it, we remove the cover and check the absorber, reinforcement bar, brackets and clips. Anything hidden goes into the estimate before work starts, with photos so you can see it yourself.
Plastic welding and tab rebuilds
Cracks are welded from behind with matching plastic and reinforced. Broken mounting tabs are rebuilt or replaced so the cover sits tight against the fenders again.
Refinishing made to flex
Bumper covers bend in normal use. We apply adhesion promoter to bare plastic and use a flexible primer and clearcoat, so the paint keeps its grip through heat, cold and minor bumps.
Color match and blending
We start from your factory paint code, then check the mix against your car under shop light and daylight. When the color calls for it, we blend into the fender or quarter panel so the bumper doesn't read as a different shade.
Sensor and camera care
Parking sensors, backup cameras and radar units often mount in or behind the bumper. We remove and reinstall them carefully and arrange recalibration when the system requires it.
Final fit check
Before pickup we check panel gaps, clip engagement and how the lights and trim line up.

Signs your bumper needs attention
- An uneven gap at the fender
- If one corner sits higher or a gap has opened along the fender, a tab or bracket has likely broken. Road vibration tends to widen it over time.
- Cracks spreading from a scuff
- Small cracks in plastic often grow, and long hot summers followed by cool nights speed that along. Caught early, a crack is usually a weld rather than a new cover.
- Flaking paint or bare plastic
- Once paint lifts, the edges keep peeling. Refinishing one spot now is simpler than refinishing the whole cover later.
- Sensor warnings after a bump
- A parking sensor that beeps nonstop or a blind-spot light that stays on can mean a sensor was knocked out of position.
- Rattling or sagging at speed
- A loose bumper catches wind on the highway and pulls farther away each trip. Have it secured before the cover comes off on the road.
How the repair runs
- 1
Your first call
Tell us what happened and what you can see. Your contact sets a time for you to bring the car in and answers early questions, including whether an insurance claim makes sense.
- 2
Inspection and written estimate
We look the bumper over and remove it when needed to check behind. You get a written, line-item estimate covering repair or replacement, paint and any sensor work.
- 3
Repair and refinish
We are I-CAR Gold certified, and we follow the vehicle maker's procedures for plastic bumpers and the sensors mounted in them. Welding, shaping, priming and painting happen in stages, with cure time between coats. If something new turns up, your contact calls you with photos before going further.
- 4
Reassembly and pickup
We reinstall the cover, sensors and trim, check fit and color in daylight, and clean the car. When you collect it, your contact walks you through what was done.
What affects the price of bumper repair
Bumper work ranges from a single scuff to a full replacement with sensor calibration, so the price follows what we find. The written estimate lists each part and each block of labor. You can see where the cost comes from before you approve anything.
- Repair or replace
- Welding a crack and refinishing usually costs less than a new cover. A cover torn in several spots can cost more to save than to replace, and we will tell you which way makes sense.
- Parts choice
- Replacement covers come from the vehicle maker or from aftermarket suppliers, and fit and price differ between them. We explain the difference and what your insurance policy allows.
- Sensors and cameras
- Bumpers with radar, parking sensors or cameras take more careful handling, and some systems need recalibration after the repair.
- Paint and blending
- Tri-coat pearls and some metallics take extra steps to match. Blending into neighboring panels adds time as well.
- Hidden structural parts
- Sometimes the foam absorber has flattened or the steel or composite bar has kinked. Those parts get added to the estimate, and we check with you before the work continues.
Bumper repair questions
- Can a cracked bumper be repaired, or does it need replacing?
- Many cracks, gouges and broken tabs can be welded and refinished. If the cover is torn in several places, badly stretched or missing pieces, replacement usually gives a better result. We look at it in person and give you an honest answer either way.
- Will a repainted bumper look different from the fenders beside it?
- Our starting point is the factory paint code on your vehicle. We spray a test card and hold it up to the fender before any color goes on the bumper. Colors that have faded in the sun, and most pearls, sometimes need a light blend into the neighboring panel. When yours does, the estimate notes it and explains the reason.
- How many days should I plan to be without my car?
- Two things set the schedule: whether parts need to be ordered and how many paint stages the color takes. Refinishing a scuffed cover is often done sooner than a replacement waiting on a part delivery. Your contact gives you an expected timeline with the estimate and calls you if anything shifts.
- My car has parking sensors. Will they work after the repair?
- We remove sensors before the repair, protect them during painting and reinstall them afterward. Some systems need recalibration once the bumper is back on, and we arrange it when the maker requires it. We check that the warnings are clear before you pick up.
- Should I file an insurance claim for bumper damage?
- That decision is yours, and it often comes down to your deductible and who was at fault. Once you have our estimate in hand, we can explain how the claim process works. Our Insurance Claims page covers it in more detail, though the adjuster still makes the coverage decisions.

Have your bumper looked at
Tell us what happened and what you can see. Your contact will set a time to inspect the car and walk you through the estimate.