Skip to content

Talk to the person who will manage your repair

(559) 409-7301
(559) 409-7301

ServicesDent Repair

Dent Repair in Lemoore Station

Door dings, shopping cart creases and the dent from a slow backing mistake. We look at the metal and the paint, tell you plainly whether paintless repair will work, and one person stays your contact from the first look at your car until you drive it home.

Technician in a dark T-shirt works a dent on a gray sedan's door with dent rods beside a striped light board, with a rack of dent tools on the shop wall

The right method depends on the paint

Most dents fall into two groups. If the paint is unbroken and the metal has not stretched, paintless dent repair is usually the better choice. We work the panel back into shape from behind with rods, or pull it from the front with glue tabs, and your factory finish stays where it is. There is no filler, no new paint and no color match to worry about.

If the paint is cracked or chipped, or the dent sits on a sharp body line, the panel needs conventional repair. We bring the metal as close to its original shape as it will go, use a thin skim of filler only where it is needed, then prime, block sand and refinish. We are an I-CAR Gold certified shop, and that training matters most on newer vehicles with aluminum panels and sensors tucked behind them.

You deal with the same person the whole way. They look at the dent with you, explain which approach fits and why, and call you when your vehicle is ready.

What dent repair covers

Paintless dent repair
For dings and soft dents where the paint is intact. Your original finish stays, and the repair usually needs far less shop time than refinishing.
Panel access and trim removal
Reaching the back of a dent can mean taking off door trim, a taillight or a fender liner. We remove parts carefully, keep clips and fasteners together, and reinstall everything the way it came off.
Crease and stretched-metal repair
When the metal has stretched, it has to be shrunk and worked back before anything else. Filler goes on thin and only where the panel needs it.
Refinishing to match
If the paint has to be redone, we match the color and blend into the neighboring panels so the repair does not stand out in daylight. Our Paint and Refinishing page covers that work in more detail.
Aluminum panels
Many newer hoods, fenders and liftgates are aluminum. It does not spring back like steel and can crack if pushed too fast, so we use separate tools and a slower hand.

Signs a dent should come in soon

  • Cracked or flaking paint at the dent

    Once the finish breaks, moisture reaches bare metal. Steel starts to rust under the paint, and the longer it sits, the more area has to be refinished.

  • A crease along a body line

    Sharp lines on doors and quarter panels are hard to restore by eye. A crease there is worth having looked at before it gets pressed further by a car door or a cart.

  • A door that closes differently

    A dent near a hinge or latch can mean more than cosmetic damage. If that is the case, we will tell you and look at it as collision repair instead.

  • Dings scattered across the car

    Parking lot dings add up. Fixing several in one visit is more efficient than one at a time.

  • A dent near a sensor or camera

    Parking sensors and blind-spot radar sit behind bumpers and quarter panels. A dent there can affect how they read, so the repair has to account for them. Damage to the plastic cover itself is handled under Bumper Repair.

What affects the price of dent repair

Two dents that look alike can take very different amounts of work. The price comes from the method, the metal and how easy it is to reach the back of the panel. Your estimate lists each item so you can see where the cost comes from.

Size, depth and count

A shallow round ding is quick work. A deep dent with stretched metal, or a dozen dings across the car, takes longer.

Where the dent sits

Dents on body lines, panel edges or near roof bracing are slower to repair than those in the open middle of a door.

Whether the paint is broken

Intact paint usually means paintless repair. Broken paint means primer, refinishing and often blending into the next panel.

Panel material

Aluminum takes more time and different tools than steel.

Access

Some dents need trim, lights or a headliner taken out first, and that labor shows up on the estimate.

How a dent repair runs at our shop

  1. 1

    A close look under good light

    We inspect the dent under shop lights, check the paint thickness for any earlier refinishing, and see whether we can reach the back of the panel.

  2. 2

    A written estimate

    You get a written line-item estimate that names the method we plan to use and the reason for it. If you are filing an insurance claim, your same contact handles that side too; our Insurance Claims page explains how.

  3. 3

    The repair itself

    Paintless work is done in slow, small pushes, checked often against a reflection board. Conventional repairs move from metalwork to primer, block sanding and paint, with drying time between coats.

  4. 4

    Final check and pickup

    Before we call you, we check the panel under angled light, where any leftover high or low spot shows up, and we clean the car. Your contact walks you through what was done when you pick it up.

Estimator and customer review a printed estimate on the hood of a gray vehicle with a crumpled front fender and bumper, outside open body shop repair bays.

Dent repair questions

Can every dent be fixed without repainting?

No. Paintless repair only works when the paint is unbroken and the metal has not stretched too far. Sharp creases and dents on panel edges often need conventional repair. We will tell you which applies before any work starts.

Will I be able to see where the dent was?

A well-done paintless repair should not show in normal light. When refinishing is needed, we blend the color into the surrounding panels so the repaired area does not read as a different shade.

Should I run a dent through insurance?

It depends on your deductible and the size of the repair. We can give you the estimate first so you can compare it with your deductible and decide. We explain the claim process, but your insurer's adjuster makes the coverage decisions.

How long will you have my car?

Paintless repairs are usually shorter than refinishing, which needs time for each coat to dry. We give you an expected timeline with the estimate, and your contact calls you if anything changes.

Can a small dent get worse if I leave it?

The dent itself rarely grows, but broken paint lets rust start on steel panels. If the finish is intact, waiting does little harm. If it is chipped, sooner is better.

Side-by-side of a gray sedan's front corner in a body shop bay: crumpled hood and scraped bumper before, smooth refinished panels after, from the same angle.

Have the dent looked at

Tell us where the dent is and what happened. Drivers from Hanford, Lemoore and nearby bring their cars to us, and the person who answers stays with your repair until you pick it up.